SOLAR & POWER SYSTEMS
Hybrid solar inverters
Match grid, PV strings, battery communications and the actual backup circuit.
Explore the buying guideReference: Deye SUN-5/6/8/10/12K-SG04LP3-EU family
Equipment category
Energy & electrical
Buying guides & project requirements.
Define solar, storage, charging, power and control projects using measured loads, interfaces, operating conditions and exact destination requirements.
- Load profiles, duty, input/output ratings and system limits
- Grid, communications, battery, motor or controller interfaces
- Exact project documents, installation and acceptance responsibility
- Complete installed scope, monitoring, spare parts and service
COMMERCIAL ENERGY SYSTEMS
Commercial battery storage
Start with load data, usable energy, power, installation evidence and project economics.
Explore the buying guideReference: Sungrow PowerStack ST225kWh-110kW-2h
ENERGY & ELECTRICAL
Diesel generator set
Specify diesel generators from actual load steps, operating duty and the site's complete electrical scope.
Explore the buying guideReference: AGG Power CU44D5A open generator reference
ENERGY & ELECTRICAL
Solar PV module
Compare solar modules by usable roof area, electrical design, mounting interfaces and traceable project documentation.
Explore the buying guideReference: LONGi Hi-MO X6 Artist Ultra Black LR5-54HTDB family
ENERGY & ELECTRICAL
Lithium battery pack
Choose lithium battery packs by the load, usable-energy boundary, inverter compatibility and installation conditions.
Explore the buying guideReference: Deye ESS SE-G5.1 Pro-B rack modules in manufacturer system reference
ENERGY & ELECTRICAL
EV DC fast charger
Plan DC fast chargers from vehicle charging needs, available site power and the operator's payment or fleet workflow.
Explore the buying guideReference: Autel Energy MaxiCharger DC Fast 240 family
ENERGY & ELECTRICAL
EV AC charging station
Choose AC charging stations around parking duration, vehicle onboard charging and the building's available supply.
Explore the buying guideReference: Autel Energy MaxiCharger AC Pro enclosure and connector reference
ENERGY & ELECTRICAL
Solar water pump system
Size solar water pumping from daily water demand, actual pumping head and the site's seasonal conditions.
Explore the buying guideReference: LORENTZ Submersible solar pump family
ENERGY & ELECTRICAL
Air source heat pump
Choose air source heat pumps from building heat loss, emitter temperatures and the local design climate.
Explore the buying guideReference: Midea R290 M thermal Arctic HT family
ENERGY & ELECTRICAL
Industrial electric motor
Specify industrial motors from driven-machine torque, starting duty, frame interfaces and site conditions.
Explore the buying guideReference: WEG W22 family
ENERGY & ELECTRICAL
Variable frequency drive
Choose variable frequency drives from motor current, load duty, control requirements and the cabinet environment.
Explore the buying guideReference: INVT GD200A family
ENERGY & ELECTRICAL
Industrial gearbox
Match industrial gearboxes to driven torque, shock duty, mounting and the exact mechanical interfaces.
Explore the buying guideReference: SEW-EURODRIVE R series helical gear units
ENERGY & ELECTRICAL
Programmable logic controller
Choose PLCs from the machine sequence, real input-output list, communication and software ownership.
Explore the buying guideReference: Siemens SIMATIC S7-1200 G2 family
ENERGY & ELECTRICAL
Battery impedance analyzers
Select a battery impedance analyzer for the actual chemistry, terminal access and maintenance workflow. Compare repeatable readings, probe options, baseline records and data export, while separating condition screening from capacity discharge testing and identifying project-specific OEM or ODM requirements.
Explore the buying guideReference: Megger BITE5
ENERGY & ELECTRICAL
Underground cable fault locator
Narrow down cable fault location and support precise field pinpointing using methods appropriate to the cable construction and suspected fault. Compare configuration, interfaces and acceptance evidence before requesting an application-specific quotation or OEM/ODM feasibility review.
Explore the buying guideReference: Megger STX40
ENERGY & ELECTRICAL
Industrial cable gland
Seal and retain a cable at an enclosure entry using a gland matched to cable dimensions, thread geometry and environmental exposure. Compare configuration, interfaces and acceptance evidence before requesting an application-specific quotation or OEM/ODM feasibility review.
Explore the buying guideReference: HUMMEL HSK-K
ENERGY & ELECTRICAL
Industrial cable tray system
Support routed cables with a coordinated tray, fitting and support system selected for cable loading, spans and installation environment. Compare configuration, interfaces and acceptance evidence before requesting an application-specific quotation or OEM/ODM feasibility review. Include the route drawing.
Explore the buying guideReference: OBO Bettermann MKS-Magic cable tray
ENERGY & ELECTRICAL
Digital multimeter
An industrial digital multimeter supports maintenance measurements such as voltage, resistance, current and frequency. Choose it around the circuits and waveforms your technicians actually encounter, then specify probes, protection, calibration and service. A large display count alone does not establish measurement accuracy or suitability at a distribution panel.
Explore the buying guideReference: Fluke 87V
ENERGY & ELECTRICAL
EV charging station tester
An EV charging station tester checks defined electrical and control functions at a charging point. Begin with AC or DC charging, connector type and the inspection scope. An adapter, a standalone analyzer and a combined installation-test kit perform different roles, so compare the complete measurement package rather than its product name.
Explore the buying guideReference: Fluke FEV350
ENERGY & ELECTRICAL
Earth resistance tester
An earth resistance tester assesses an earthing electrode or grounding network using a method suited to the installation. The first selection question is whether the job needs stakes, selective measurements or a closed-loop clamp method. Site access, parallel earth paths and interference affect that decision as much as the instrument's resistance range.
Explore the buying guideReference: Fluke 1625-2
ENERGY & ELECTRICAL
Industrial earthing electrode system
Specify an earthing electrode system from the electrical design and site conditions, then select compatible rods, conductors and connections. Compare installation feasibility, corrosion and inspection evidence rather than assuming a particular rod length or material guarantees the required system performance.
Explore the buying guideReference: nVent ERICO 6158009300 Copper-Bonded Ground Rod
ENERGY & ELECTRICAL
Electrical clamp meter
An electrical clamp meter measures current through a compatible jaw or flexible probe, with additional functions varying by model. Select it for the conductor geometry, AC or DC current, waveform and access conditions. For industrial maintenance, low-current resolution and useful recording behavior can matter more than the largest current printed on the case.
Explore the buying guideReference: Fluke 376 FC with iFlex
ENERGY & ELECTRICAL
Electrical insulation tester
An electrical insulation tester applies a defined test voltage and measures insulation resistance on suitable isolated equipment. Select its voltage range, charging capability and diagnostic functions around the asset and approved test plan. A higher maximum voltage is not automatically better, and insulation-resistance testing should be distinguished from dielectric withstand testing.
Explore the buying guideReference: Fluke 1555 FC
ENERGY & ELECTRICAL
Electrical thermal imager
An electrical thermal imager helps locate temperature patterns in equipment that is visible to its infrared optics. Choose resolution, lens and focus around the target size and viewing distance, then define the inspection and reporting method. A visually striking image does not by itself establish an accurate component temperature or diagnose the cause.
Explore the buying guideReference: Fluke Ti480 PRO
Build a comparable request
Start with the work your equipment needs to do.
Share the application, required output, destination, utilities, quantities and planned timing. For OEM / ODM projects, include the branding, configuration or engineering changes, sample approval and acceptance requirements.
Practical buying decisions
Guides for this equipment category.
Air to water heat pump radiator compatibility: Buyer Decision Guide
Existing radiators can work with air to water heat pumps when assessed against the proposed supply temperatures and building heat demand. Request emitter output calculations at the heat pump's intended delivery temperature, verify system flow rates and check whether the radiators meet design-day heating requirements.…
Read the guide
Solar tracking system: RFQ Checklist and Quotation Review
A comparable solar tracking system quotation starts with module layout, terrain, geotechnical data. Record the required result, site interfaces and acceptance evidence in one revision-controlled RFQ. IndustryApex engineers use these inputs to define the equipment, integration and OEM/ODM scope for your project.
Read the guide
Solar mounting structure: RFQ Checklist and Quotation Review
A comparable solar mounting structure quotation starts with module and clamp data, array layout, wind and snow. Record the required result, site interfaces and acceptance evidence in one revision-controlled RFQ. IndustryApex engineers use these inputs to define the equipment, integration and OEM/ODM scope for your…
Read the guide