A comparable aggregate trommel screen quotation starts with feed, cuts, drum. Record the required result, site interfaces and acceptance evidence in one revision-controlled RFQ. IndustryApex engineers use these inputs to define the equipment, integration and OEM/ODM scope for your project.
Shown as a configuration reference. Availability and the equipment offered for your project are confirmed separately.
This aggregate trommel screen RFQ checklist is a working procurement document. Use it to turn the requirements in the Aggregate trommel screen equipment guide into a written project brief and a comparable equipment offer.
What should a quotation for aggregate trommel screen include?
Complete the product-specific requirements below. Keep buyer requirements, the proposed equipment response and unresolved points in separate columns. Attach the relevant drawings, samples or site records to the same RFQ revision.
| Requirement to define | How to make the response comparable |
|---|---|
| Feed Grading, density, moisture and troublesome constituents. |
Record the actual requirement, its supporting document and any unresolved point. Request a written response against the same requirement revision. |
| Cuts Required products, rejects and grading assessment. |
Supply a representative example and its difficult variation. Identify the drawing, sample, photograph or production record used for the proposal. |
| Drum Apertures, media, wear and replacement options. |
Record the actual requirement, its supporting document and any unresolved point. Request a written response against the same requirement revision. |
| Process Feeding, preparation and wet or dry boundary. |
Record the actual requirement, its supporting document and any unresolved point. Request a written response against the same requirement revision. |
| Layout Outputs, conveyors, stockpiles and mobile setup. |
Provide the actual site information and connection boundary. Identify what IndustryApex supplies and what the installation site must prepare. |
| Evidence Representative separation, recovery and stable-operation trial. |
Agree the sample or case, measurement method, record and decision owner. Ask which evidence is included in the quotation. |
| Destination, site conditions and delivery access | Provide the actual site information and connection boundary. Identify what IndustryApex supplies and what the installation site must prepare. |
| Installation boundary, utilities and connection drawings | Attach the current revision and mark requested changes. Ask for the approved scope, engineering responsibility and change-control record. |
| Acceptance procedure, documentation and training scope | Agree the sample or case, measurement method, record and decision owner. Ask which evidence is included in the quotation. |
| OEM/ODM changes interface, material, branding or new design; written engineering feasibility required |
Attach the current revision and mark requested changes. Ask for the approved scope, engineering responsibility and change-control record. |
How to compare aggregate trommel screen quotations
Return the same completed checklist to our engineering team when reviewing a revised offer. For each requirement, record the proposed configuration, included evidence, price boundary and open question. A blank response is an unresolved item; request clarification before treating two offers as equivalent.
- Feed: identify the requirement revision, the proposed response and the document that supports it.
- Cuts: identify the requirement revision, the proposed response and the document that supports it.
- Drum: identify the requirement revision, the proposed response and the document that supports it.
Request separate scope lines for the main equipment, application-specific tooling or accessories, site connections, integration work, commissioning, training and support, where applicable. Record delivery terms, quotation validity and exclusions beside the quoted price. Keep optional items separate from items required for the stated result.
Aggregate trommel screen acceptance criteria: what must be agreed?
Use the following equipment requirements to frame the acceptance discussion:
- Evidence: Representative separation, recovery and stable-operation trial.
- Acceptance procedure, documentation and training scope
Have the responsible engineering personnel agree the test case and method for the exact offered equipment. Record the input or sample identification, supplied configuration, observations or measurements, agreed decision criteria, open deviations and sign-off responsibility. Separate evidence available at the factory from checks that depend on the installed site. Retain the accepted records with the equipment and document later requirement changes.
OEM/ODM aggregate trommel screen: define the change boundary
- OEM/ODM changes: interface, material, branding or new design; written engineering feasibility required
Distinguish approved standard options, branding and documentation from mechanical, electrical, control or process development. Send the intended application, current drawings, target market, quantities and requested changes. IndustryApex engineers review feasibility and define the proposed supply and engineering scope. Agree design ownership where relevant, the validation responsibility and the evidence that will accept the changed configuration. A reference photograph does not define the offered configuration or grant rights to relabel the pictured brand.
Build your aggregate trommel screen project brief
Use the worksheet to record your inputs and open questions. You can download the brief or carry it into the project request. It is sent to IndustryApex only when you complete and submit that request form.
Complete your product-specific RFQ worksheet
You can edit the final requirements on the request form. No inquiry is submitted from this worksheet.
Use this brief in my project request ↗Discuss the equipment scope with our engineers
Send the completed brief with the required result, destination and purchase timing. Our engineers can review the equipment configuration, application interfaces and requested customization, then identify the information still needed for a confirmed quotation.
Request a aggregate trommel screen quotation ↗ · Discuss OEM requirements · Discuss ODM engineering
Related equipment scope: Vibrating screen · Mobile crusher · Concrete batching plant.
Define your equipment requirements
Review the Aggregate trommel screen buying guide for the complete equipment scope.
Discuss this equipment project ↗ · OEM requirements · ODM requirements. Configuration and feasibility are reviewed for your application.
Explore the Aggregate trommel screen buying guide and RFQ checklist ↗
Frequently asked questions
What belongs in an RFQ for aggregate trommel screen?
Start with feed, cuts, drum. Complete the remaining product-specific requirements in the worksheet, and attach the relevant drawings, sample information and site records. State the destination, required result and purchase timing so our engineers can review a defined project.
How do I compare aggregate trommel screen quotations on the same basis?
Use the same requirement revision for each comparison. Record the proposed configuration, included evidence, required accessories or integration, commissioning responsibilities, delivery terms and exclusions. Request a written response to unresolved requirements rather than comparing the main equipment price alone.
What belongs in the aggregate trommel screen acceptance record?
Identify the approved input or sample, exact configuration, agreed method, observations or measurements, decision criteria, deviations and responsible sign-off. Agree with the responsible engineering personnel what can be checked at the factory and what depends on the installed site.
Can IndustryApex review OEM/ODM aggregate trommel screen requirements?
Yes. Send the application, requested changes, drawings, target market, quantities and acceptance requirements. IndustryApex engineers review the proposed equipment and engineering scope. Feasibility, validation work, commercial terms and delivery are confirmed for the agreed project; the reference photograph does not establish branding rights.
Reference information
- Terex Ecotec TTS 620 official product reference
- Terex Ecotec TTS 620 technical brochure
Reference data and images explain equipment configurations. IndustryApex engineers confirm the offered model, specification and commercial scope in your project quotation.