Specify a concrete line pump from the mixture, pipeline route and required placement rate. This guide covers ground-based delivery through connected pipe or hose, distinct from articulated boom placement. Compare pressure/flow duty, cleaning and the full site setup before choosing a unit. Pump representative concrete through the agreed route, recording mixture condition, delivery rate, interruptions and relevant operating indications. Include line relocation, controlled stopping and the approved cleanout procedure. Retain the offered pump configuration and pipeline drawing with the evidence rather than extrapolating from a water or empty-running demonstration. Submit the intended configuration and any OEM/ODM changes for project-specific feasibility review.
Specify a concrete line pump from the mixture, pipeline route and required placement rate. This guide covers ground-based delivery through connected pipe or hose, distinct from articulated boom placement. Compare pressure/flow duty, cleaning and the full site setup before choosing a unit.
Shown as a configuration reference. Availability and the equipment offered for your project are confirmed separately.
Confirm mixture pumpability
Provide the approved mixture, aggregate grading and maximum particle size, workability, admixtures and fibers. Ask for compatibility with the exact pump and conveying system. A pump's maximum pressure and delivery rating do not prove that a difficult site mixture will travel reliably through the intended pipeline.
Draw the complete pipeline route
Include horizontal distance, vertical lift, bends, reducers and hose lengths with connection details. Pressure losses depend on the complete route and mixture. Straight-line distance alone can understate the duty and overlooks the support, restraint and handling needed around the actual placement area.
Match useful flow and pressure
State placement demand, allowable interruptions and the required rate range. Compare output and pressure for the offered configuration under relevant conditions. Maximum pressure and maximum output may describe different operating points, so they should not be combined into an unsupported promise of simultaneous performance.
Define feeding and site logistics
Identify how concrete reaches the hopper, truck access and the personnel needed for placement. Confirm hopper guarding and the approved response to changing delivery intervals. A capable pump can still be underused or interrupted when ready-mix arrival, line movement and the placing crew are not coordinated.
Plan cleaning and blocked-line response
Define the maker-approved cleaning arrangement, washout collection and safe residual-pressure release. Obtain pipeline inspection and blockage procedures for qualified personnel. A blocked concrete line stores hazardous energy; procurement should include the necessary equipment and instructions rather than leave the response to improvised site practice.
Scope wear parts and drive support
Identify wear plates, seals, delivery cylinders and valve components for the exact unit. Confirm engine or electric-drive requirements and destination service. Pictured hose or pipe kits may be optional, so list all consumables and connectors needed for a usable placement package.
Compare a complete concrete line pump scope
| Decision | Information to compare |
|---|---|
| Confirm mixture pumpability | Mixture design, aggregate, workability, fibers and pumpability evidence |
| Draw the complete pipeline route | Pipeline plan, lift, bends, reducers, hose sizes and supports |
| Match useful flow and pressure | Required rate range, pressure/flow operating point and placement continuity |
| Define feeding and site logistics | Concrete delivery, hopper access, line movement and placing-crew sequence |
| Plan cleaning and blocked-line response | Cleaning method, washout collection, pressure release and blockage procedure |
| Scope wear parts and drive support | Wear components, drive variant, pipe/hose kit and seasonal service |
Plan installation and access
Qualified site personnel should confirm the pump position, ground support, pipeline restraint and exclusion zones using the supplied instructions and engineered placement plan. Provide the required power or fuel and washout area. Verify connections and isolation before charging the conveying line.
Agree acceptance evidence before ordering
Pump representative concrete through the agreed route, recording mixture condition, delivery rate, interruptions and relevant operating indications. Include line relocation, controlled stopping and the approved cleanout procedure. Retain the offered pump configuration and pipeline drawing with the evidence rather than extrapolating from a water or empty-running demonstration.
Define OEM/ODM engineering boundaries
OEM interfaces, permitted pipe packages and control language can be reviewed. ODM pumping, pressure-boundary or safety changes require engineering and concrete trials. A reference photograph does not establish stock, authorization or a transferable pumping-distance claim for another machine.
What should your concrete line pump RFQ include?
- Mixture design, aggregate, workability, fibers and pumpability evidence
- Pipeline plan, lift, bends, reducers, hose sizes and supports
- Required rate range, pressure/flow operating point and placement continuity
- Concrete delivery, hopper access, line movement and placing-crew sequence
- Cleaning method, washout collection, pressure release and blockage procedure
- Wear components, drive variant, pipe/hose kit and seasonal service
- Destination, working environment, access and delivery constraints
- Installation responsibility, utilities and connection drawings
- Acceptance samples, documented test method, operator training and maintenance scope
- OEM/ODM changes requested: identification, tooling, interfaces or new design; engineering feasibility to be confirmed
Need OEM / ODM customization?
Submit branding, packaging, configuration or engineering requirements for this equipment. Include the target market, initial and annual quantities, required changes and acceptance criteria.
Customization feasibility, permitted branding, development responsibilities, minimum quantity, cost and lead time are reviewed for the proposed supplier and configuration before a quotation is confirmed.
Frequently asked questions
How do I confirm mixture pumpability?
Provide the approved mixture, aggregate grading and maximum particle size, workability, admixtures and fibers. Ask for compatibility with the exact pump and conveying system. A pump's maximum pressure and delivery rating do not prove that a difficult site mixture will travel reliably through the intended pipeline.
How do I draw the complete pipeline route?
Include horizontal distance, vertical lift, bends, reducers and hose lengths with connection details. Pressure losses depend on the complete route and mixture. Straight-line distance alone can understate the duty and overlooks the support, restraint and handling needed around the actual placement area.
How do I match useful flow and pressure?
State placement demand, allowable interruptions and the required rate range. Compare output and pressure for the offered configuration under relevant conditions. Maximum pressure and maximum output may describe different operating points, so they should not be combined into an unsupported promise of simultaneous performance.
How do I define feeding and site logistics?
Identify how concrete reaches the hopper, truck access and the personnel needed for placement. Confirm hopper guarding and the approved response to changing delivery intervals. A capable pump can still be underused or interrupted when ready-mix arrival, line movement and the placing crew are not coordinated.
How do I plan cleaning and blocked-line response?
Define the maker-approved cleaning arrangement, washout collection and safe residual-pressure release. Obtain pipeline inspection and blockage procedures for qualified personnel. A blocked concrete line stores hazardous energy; procurement should include the necessary equipment and instructions rather than leave the response to improvised site practice.
How do I scope wear parts and drive support?
Identify wear plates, seals, delivery cylinders and valve components for the exact unit. Confirm engine or electric-drive requirements and destination service. Pictured hose or pipe kits may be optional, so list all consumables and connectors needed for a usable placement package.
Reference information
- SANY LP12012G official product reference
- SANY concrete line pump official family or technical reference
Reference data and images explain equipment configurations. IndustryApex engineers confirm the offered model, specification and commercial scope in your project quotation.