Sand reclamation removes residual binder and unwanted fractions from used foundry sand for controlled reuse. Mechanical attrition and thermal treatment serve different binder and quality requirements. Choose the configuration by used sand and reuse criteria and attrition versus thermal treatment. Treat representative used sand and measure residual binder, fines, grain distribution and resulting mold or core strength. Include variable incoming batches. OEM/ODM requirements are reviewed against the intended process, site interfaces and acceptance evidence; the reference image identifies a product family and does not establish supply availability or an authorized brand relationship.
Sand reclamation removes residual binder and unwanted fractions from used foundry sand for controlled reuse. Mechanical attrition and thermal treatment serve different binder and quality requirements. Recovers used foundry sand; binder removal and recovered-sand criteria define the process.
Shown as a configuration reference. Availability and the equipment offered for your project are confirmed separately.
What is the application scope for foundry sand reclamation system?
Sand reclamation removes residual binder and unwanted fractions from used foundry sand for controlled reuse. Mechanical attrition and thermal treatment serve different binder and quality requirements.
Recovers used foundry sand; binder removal and recovered-sand criteria define the process. A high recovered mass does not establish reusable sand quality if residual binder or fines prevent sound molds.
How should used sand and reuse criteria be specified?
Provide binder chemistry, contaminants, grain distribution, residual binder, fines and desired reuse route. Separate incompatible sand streams before selecting a reclamation process.
The RFQ should make used sand and reuse criteria a separate review item. Describe the expected variation, not only the easiest operating case, and ask the bidder to identify restrictions that affect the intended production mix.
What configuration evidence should be compared?
Compare binder removal, grain damage, dust separation, cooling and energy input. Include upstream lump breaking and downstream classification or blending where required.
Prepare an evidence pack with drawings, operating conditions and accepted samples. Ask each bidder to mark deviations against the same pack, making assumptions visible instead of relying on similarly named machines or headline capacity claims.
| Decision | Evidence to compare | Procurement consequence |
|---|---|---|
| Used sand and reuse criteria | Provide binder chemistry, contaminants, grain distribution, residual binder, fines and desired reuse route. Separate incompatible sand streams before selecting a reclamation process. | Defines the input and work envelope to be included in the offer. |
| Attrition versus thermal treatment | Compare binder removal, grain damage, dust separation, cooling and energy input. Include upstream lump breaking and downstream classification or blending where required. | Determines configuration, supporting equipment and exclusions. |
| Production acceptance | Treat representative used sand and measure residual binder, fines, grain distribution and resulting mold or core strength. Include variable incoming batches. | Establishes the agreed demonstration and inspection records. |
What must be prepared for installation?
Plan extraction, residue disposal, storage, cooling and sand transfer; thermal systems additionally need appropriate combustion and emissions review.
Review the proposed arrangement with both production and maintenance staff. Utility availability, access routes and the local installation rules should be checked against the actual receiving site rather than an assumed standard factory.
How should production acceptance be demonstrated?
Treat representative used sand and measure residual binder, fines, grain distribution and resulting mold or core strength. Include variable incoming batches.
Keep reference samples and a signed results sheet linked to the tested configuration. Changes to tooling, controls or incoming conditions after the trial should trigger an appropriate review of the acceptance evidence.
Which service provisions protect repeatability?
Inspect wear surfaces, screens, seals, dust systems and temperature controls; trend reclaimed-sand properties against process settings.
Request practical service training using the supplied equipment. Include safe cleaning, wear assessment and replacement procedures; define warranty conditions separately from the consumables that are expected to wear during normal use.
What can be customized through OEM or ODM?
OEM modules may be configured; ODM mixed binder streams require reclamation trials and a verified reuse-quality envelope.
Submit the proposed changes with the foundry sand reclamation system duty and acceptance plan. Separate a purchased option from new engineering, and agree drawings, validation responsibility, documentation and spare-part support before design release. The manufacturer example is a technical reference only; customization does not imply permission to copy protected designs or use a brand.
Request an itemized offer that identifies tooling or auxiliaries, freight assumptions, commissioning, operator training and recurring consumables. Agree who supplies trial inputs and inspection instruments, and resolve deviations before comparing the complete project cost.
What should your foundry sand reclamation system RFQ include?
- Foundry sand reclamation system application and required process result
- Used sand and reuse criteria: Provide binder chemistry, contaminants, grain distribution, residual binder, fines and desired reuse route. Separate incompatible sand streams before selecting a reclamation process.
- Attrition versus thermal treatment: Compare binder removal, grain damage, dust separation, cooling and energy input. Include upstream lump breaking and downstream classification or blending where required.
- Representative input variation and difficult production cases
- Required acceptance evidence: Treat representative used sand and measure residual binder, fines, grain distribution and resulting mold or core strength. Include variable incoming batches.
- Site and utility scope: Plan extraction, residue disposal, storage, cooling and sand transfer; thermal systems additionally need appropriate combustion and emissions review.
- Service provision: Inspect wear surfaces, screens, seals, dust systems and temperature controls; trend reclaimed-sand properties against process settings.
- OEM/ODM engineering scope: OEM modules may be configured; ODM mixed binder streams require reclamation trials and a verified reuse-quality envelope.
- Upstream preparation and downstream handling interfaces
- Destination country and applicable installation requirements
- Production schedule, changeover mix and operator availability
- Drawings, samples, inspection method and rejected-output criteria
Need OEM / ODM customization?
Submit branding, packaging, configuration or engineering requirements for this equipment. Include the target market, initial and annual quantities, required changes and acceptance criteria.
Customization feasibility, permitted branding, development responsibilities, minimum quantity, cost and lead time are reviewed for the proposed supplier and configuration before a quotation is confirmed.
Frequently asked questions
What defines the application boundary for foundry sand reclamation system?
Sand reclamation removes residual binder and unwanted fractions from used foundry sand for controlled reuse. Mechanical attrition and thermal treatment serve different binder and quality requirements. Recovers used foundry sand; binder removal and recovered-sand criteria define the process. Define the intended production result before comparing nominal ratings, and ask for evidence using the actual input conditions.
What should the foundry sand reclamation system RFQ state about used sand and reuse criteria?
Provide binder chemistry, contaminants, grain distribution, residual binder, fines and desired reuse route. Separate incompatible sand streams before selecting a reclamation process. Send the representative inputs and the difficult cases together, then require the supplier to state any restrictions or preparation steps needed to repeat the proposed result.
How should attrition versus thermal treatment be checked?
Compare binder removal, grain damage, dust separation, cooling and energy input. Include upstream lump breaking and downstream classification or blending where required. Ask the bidder to document the selected arrangement and exclusions against the real duty. Confirm which supporting components and setup work are included in the commercial scope.
What acceptance test is appropriate for foundry sand reclamation system?
Treat representative used sand and measure residual binder, fines, grain distribution and resulting mold or core strength. Include variable incoming batches. Agree the sampling method and rejection criteria before the trial, and keep configuration and inspection records for the later site-acceptance comparison.
What installation and service details should be confirmed?
Plan extraction, residue disposal, storage, cooling and sand transfer; thermal systems additionally need appropriate combustion and emissions review. Inspect wear surfaces, screens, seals, dust systems and temperature controls; trend reclaimed-sand properties against process settings. Allocate local preparations and specialist support to named parties before shipment so commissioning and subsequent maintenance have a clear owner.
Can foundry sand reclamation system configurations be customized through OEM or ODM?
OEM modules may be configured; ODM mixed binder streams require reclamation trials and a verified reuse-quality envelope. Supply drawings and operating conditions for feasibility review. Engineering changes require agreed validation and documentation; a reference brand image does not establish an authorized supply or manufacturing relationship.
Reference information
- Sand Reclamation Archives - Sinto America
- 自硬性 自硬性砂再生機 自硬性砂冷却装置｜鋳造｜新東工業株式会社
Reference data and images explain equipment configurations. IndustryApex engineers confirm the offered model, specification and commercial scope in your project quotation.